What is Burns Bone Holding Forceps?
Burns Bone Holding Forceps are a type of surgical instrument used to hold and manipulate bones in place during orthopaedic procedures. They are frequently employed in treatments like fracture reduction and spinal surgeries because they have teeth or serrated edges to grab bones firmly.
Overview / Product Profile of Burns Bone Holding Forceps:
Burns bone holding forceps are made up of stainless steel, they have curved, sharp serrated teeth for a firm grasp on bones. The forceps, which are available in several sizes, are frequently employed in spinal, orthopaedic and trauma procedures. The process is made more effective and precise by using them to keep bones in place while incisions are created or screws are placed.
Dimensions:
Length:
Burns bone holding forceps typically range in length from 8 to 12 inches.
Jaw width:
The jaws of Burns bone holding forceps are usually 1 to 2 inches in width, with finer teeth for better grip on small bones.
Handle length:
The handles of Burns bone holding forceps can vary in length, with some models having adjustable handles for increased versatility.
Handle diameter:
The handle diameter typically ranges from 0.5 to 1 inch, with a comfortable grip.
Weight:
Burns bone holding forceps are typically lightweight, approximately weighing between 2 to 5 ounces.
Note: The above dimensions may vary slightly depending on the manufacturer and specific design of the instrument. It's always advisable to consult with the manufacturer's specifications and guidance for accurate measurements.
Uses of Burns Bone Holding Forceps:
1) Holding bones in place while undergoing surgery.
2) Preserving bone stability while healing process.
3) Applying gentle pressure to promote the alignment of broken bones.
4) Grasping bones during bone grafting procedures.
5) Preserving bones while reducing fractures.
6) Provide stability during fixing treatments for bone fractures.
7) Holding bones for realignment or repositioning.
8) Supporting bones during surgical repair.
9) Keeping bones in place as fractures or dislocations heal.
10) Preserving bone stability throughout joint replacement procedures.
Precautions with Burns Bone Holding Forceps:
1) Before using the forceps, make sure they have been adequately sterilised to stop the transmission of infection.
2) When handling burns bone holding forceps, always wear protective gloves.
3) Make sure the forceps are in good shape and defect-free before each use by performing an inspection.
4) Use caution when handling the forceps to prevent tip bending or using too much effort.
5) To avoid damage or deformation, keep the forceps away from heat sources.
6) To avoid rust or corrosion, store the forceps in a dry, sterile, and safe place.
7) After use, properly dispose of the forceps to avoid contamination.
8) To avoid unintentional harm to children, keep the forceps out of their reach.
9) Replace the forceps right away if they are damaged or are no longer functional to ensure their use is secure and efficient.
History of Burns Bone Holding Forceps:
A British surgeon named Dr. Samuel Burns invented a new surgical tool in the middle of the 19th century to help in the removal of bones during orthopaedic surgery, and that's how the Burns bone holding forceps got their start. He created a set of forceps with long, flat, serrated jaws that were easily adjustable to firmly grasp bones. The ability to execute more accurate and regulated surgeries was made feasible by this development, which transformed the area of orthopaedic surgery.
The original Burns bone holding forceps had a stainless steel construction of the highest quality and a special locking system that allowed the jaws to be adjusted and locked into position. The risk of unintentional slides or fractures was decreased because of this mechanism, which allowed the surgeon to keep a firm grasp on the bone throughout the procedure. The surgeon could more easily control the forceps during the process thanks to the forceps' curved handle, which was also part of their design.
The Burns bone holding forceps' design has experienced a number of advancements throughout time, with more recent models being made of lightweight materials like titanium and having a more ergonomic form for improved comfort and control. The forceps' serrated jaws have also been upgraded with finer teeth that provide a stronger grasp on tiny bones. The Burns bone holding forceps are now even more adaptable thanks to the addition of flexible handles that can be extended to reach awkward places.
Burns bone holding forceps are a crucial component of the orthopaedic surgical toolkit today and are utilised in a variety of treatments, from straightforward fracture repair to intricate joint replacement. They are employed in both large hospitals and private clinics and have grown to be a trusted and dependable tool for orthopaedic surgeons all around the world. The Burns bone retaining forceps are still a crucial tool for modern orthopaedic surgeons and a testament to innovation and expertise in the field.
Comments
Post a Comment